The copper schedule on a commercial job pulls from two sides. Building wire delivers the power with VNTC for tray and exposed runs and MC Copper for feeder and branch circuits.
Low-voltage cable handles the signal layer with category cable, coax, control, fire alarm, security, speaker, thermostat, and bundled runs that connect and secure the building. Commodity Cables stocks both sides of the copper catalog so a distributor can source the full pull on one PO.
Since 2001, Commodity Cables has manufactured and distributed wire and cable to partners across the country, with 11 warehouse locations and same-day shipping on in-stock orders placed by 2:30 PM.
Every product page carries an ungated, downloadable spec sheet, and our sales team is readily available to answer your questions from our US offices.
| Cable Family | What We Stock | Common Use |
|---|---|---|
| VNTC-ER | 600V TC-ER tray cable, THWN-2 copper, 14 AWG to 6 AWG, 3/C and 4/C with ground | Tray cable, exposed runs, direct burial, wet or dry locations |
| MV-105 (15kV) | 15kV MV-105, 133% insulation, EPR, copper tape shield, 2 AWG to 1500 MCM | Medium-voltage power distribution, feeder and branch circuits |
| MV-105 (35kV) | 35kV MV-105, 133% insulation, EPR, copper tape shield, 1/0 AWG to 1500 MCM | Medium-voltage power transmission and distribution |
| MC Copper | Metal-Clad cable with copper conductors | Feeder and branch circuit wiring per NEC |
The power side of the copper catalog carries line voltage from service equipment through panelboards to branch circuits and fixed gear. VNTC-ER is a 600V TC-ER tray cable with THWN-2 copper conductors and a PVC jacket, rated for cable tray, exposed runs, and direct burial in wet or dry locations. Stocked sizes run from 14 AWG through 6 AWG in 3-conductor and 4-conductor configurations with ground, compliant with UL 83, UL 1277, and FT4 flame test requirements.
MV-105 medium-voltage cable covers the high side of the copper power catalog. 15kV MV-105 uses EPR insulation at 133% insulation level with copper tape shield and ez-Pull PVC jacket, rated for continuous operation at 105C with emergency overload to 140C and short circuit rating to 250C. Stocked from 2 AWG through 1500 MCM in 1-core and 3-core configurations, compliant with UL 1072 and ICEA S-93-639. 35kV MV-105 shares the same construction and standards at 35kV, stocked from 1/0 AWG through 1500 MCM. Both are suited for wet and dry areas, conduits, ducts, direct burial, and tray installations.
MC Copper is a factory-assembled cable with copper conductors and interlocked armor, handling feeder and branch circuit wiring in commercial and industrial buildings per NEC Article 330.
Category cable is the backbone of structured network wiring, and Commodity Cables stocks Cat 5E, Cat 6, and Cat 6A in the constructions distributors need most. Every category is available shielded (F/UTP with aluminum mylar foil) and unshielded (U/UTP), in both riser (CMR) and plenum (CMP) ratings.
Each category is available in 10 standard jacket colors: blue, white, gray, black, red, green, yellow, orange, purple, and pink. Custom colors are available per customer request. All cable is solid bare copper with sequential footage markings, compliant with ANSI/TIA 568-C.2 and ANSI/TIA 862 for building automation. Browse the full category cable catalog for all stocked variants.
| Cable Family | What We Stock | Common Use |
|---|---|---|
| Category Cable | Cat 5E, Cat 6, Cat 6A in shielded and unshielded, 10 jacket colors | Ethernet, PoE, building automation |
| Bundled | Dual and quad Cat5e/Cat6 under one jacket | One pull for structured wiring |
| Coax | RG6, RG6 Quad, RG59, RG11 in riser, plenum, outdoor | Video, broadband, CCTV |
| Control Cable | 14 to 22 AWG multi-conductor, shielded and unshielded | HVAC, access control, automation |
| Fire Alarm | FPLR riser and FPLP plenum, 14 to 22 AWG | Fire alarm and signaling circuits |
| Security | 22 AWG, 2 and 4 conductor, solid and stranded | Alarm panels, sensors, intercoms |
| Speaker Cable | 12 to 16 AWG, 2 and 4 conductor | Distributed audio and paging |
| Thermostat | 18 AWG in 2 to 8 conductor, plus 20/4 | HVAC controls |
Riser and plenum both live in the same warehouse, same catalog, and same ship schedule. Commodity Cables stocks both CMR and CMP jacket ratings across every copper and low-voltage family in this catalog, plus outdoor and water-blocked coax variants. Every SKU ships with a downloadable spec sheet confirming jacket listing, AWG, conductor count, and code compliance. The quote team verifies availability before the PO drops, so split orders and inspection holds don’t eat into the margin.
RG6 coax cable is the workhorse for broadband, satellite, and CCTV runs, and RG6 quad shield steps in where interference is heavy. RG59 fits short analog video runs, and RG11 carries long runs with lower signal loss. We stock riser, plenum, and outdoor builds across all four, including outdoor water-blocked variants.)
Every product page has a downloadable spec sheet, so the crew can verify before the PO goes in.
Idle labor can cost $135 per hour. That’s why Commodity Cables prides itself on delivering top notch products matched with exceptional service for our partners. Distributors choose us because we offer:
The 35-year end-to-end structured cabling warranty covers bundled Cat5e and Cat6 cable sold through Commodity Cables, backed by joint channel warranty agreements. It does not extend to coax, control, fire alarm, security, speaker, or thermostat cable in this category.
Commodity Cables ships from 11 warehouse locations across the United States:
United States: Suwanee, GA · Forest Park, GA · Buford, GA · Bensenville, IL · Clifton, NJ · Farmers Branch, TX · Houston, TX · Indianapolis, IN · Lebanon, TN · Platteville, CO · Tewksbury, MA. The nearest warehouse is selected based on delivery ZIP to keep transit times short. Same-day shipping applies on standard orders placed by 2:30 PM.
Send the part numbers, quantities, and delivery ZIP to 866-945-5051 or Contact Commodity Cables | Call 866-945-5051 We come back with stock status, pricing. Same-day shipping applies on standard orders placed by 2:30 PM.
Send the part numbers and quantities, and we will come back with stock, price, and ship date. Call 866-945-5051 or request a quote.